-
There's now a HAL published on crates.io: [`embedded-hal`][] ([Introduction blog post][brave-new-io]). :tada:
[`embedded-hal`]: https://docs.rs/embedded-hal/0.1.0/embedded_hal/
[brave-new-io]: htt…
-
Hey, how is it going?
I have recently tried to make a indoor localization system, based on this description
part 1
https://sites.google.com/site/wayneholder/uwb-ranging-with-the-decawave-dwm1000…
-
I got the beacons to show up once on the dashboard, but the location of the beacon wasn't accurate. Unfortunately, I can't get any of the scanners to show up on the dashboard now, even though they are…
-
... in order to allow choosing modulation modes BPSK, O-QPSK, and sub-modes (speed), without recompiling.
See: RF212B data sheet p. 117
-
hi,
insmod the dw1000.ko, but report the followong error:
./dw1000.ko: Invalid module format
I have already checked the kernal version ok.
> pi@raspberrypi:~/rsp_linux/dw1000-linux $
pi@r…
-
hi,
compile the dw1000 driver , we also use the kernel 4.9.80, but insmod it report error, as following:
> pi@raspberrypi:~/rsp_linux/dw1000-linux $ ls
deca_version.h dw1000.ko dw1000.o …
-
In AoA and PDOA approaches, it will be critical for radio tags to transmit unmodulated sinusoidal waves in order to correctly determine the phase shifts of an impinging received signal between antenna…
-
I think it's time to think about designing a FC specifically for INAV.
Features I want to have on this FC:
1. Future-proof design with an F4 (or even F7) CPU
2. 8 outputs supporting 8/0, 6/2, 2/6 mo…
-
Hi there!
I'd like to ask if you could add the following library to allow working with Decawave's UWB transceiver.
It's on Github at https://github.com/thotro/arduino-dw1000.
Many thanks and
Cheer…