-
Hi,
is there any chance to get the full list of available objects communicated between the Resol adapters? Or in other words: the standard definition of all variables flying over the VBUS net? The …
-
ERC checks shows two USB micro-B ports with their Vbus pins tied together. If both are powered from 5V, the two 5V supplies will be connected.
Is one of them supposed to be a USB micro-A? Or should…
-
On the V1 breakout board, C2 is specified as 100uF. USB2.0 requires at least 1uF and no more than 10uF directly connected to VBUS. Maybe consider replacing C2 with 1.0uF - 4.7uF. Also since the USB co…
-
As in the title: any chance for a version supporting USB-PD, with USB-C on both sides? The USB-PD charge still to be negotiated between both devices connected at the ends, I'd just like ChargeGuard to…
-
Hallo,
ich habe unter homeassistant/config/addons die Datei config.js angelegt und die Vorlage für den Vbus-LAN-Adapter hineinkopiert und die IP-Adresse auf die des Adapters gesetzt.
Dann habe ich…
-
**Describe the set-up**
* NUCLEO-G474RE + X-NUCLEO-SRC1M1
* STM32CubeIDE Version: 1.14.1
**Describe the bug**
The measured Isense current and Vbus voltages are somewhat inaccurate (significant…
-
Same code from #59 on same Badger2040W with Badger_OS [v0.0.4 ](https://github.com/pimoroni/badger2040/releases/tag/v0.0.4) :
```
from machine import ADC, I2C, Pin
# reading 'WL_GPIO2' on a pic…
-
![IMG_0822](https://github.com/user-attachments/assets/769bbda1-829d-4cad-b502-e4e7f4aa75bb)
I've been testing NanoKVM with a Sipeed Lichee Pi 3A board, and I'm not sure if this is a flaw in the US…
-
Hi. I am trying to connect usb host shield with NodeMCU. I cut the traces (both 3.3v and 5v) from vbus but when i use my multimeter to check the continuity between 3.3V pin and Vbus pad i still get co…
-
USB VBUS never gets powered by the carrier. Most likely an error with the VBUS_EN# pins polarity or missing pull-up?
Might also be a firmware error.