-
### Board
MH-ET LIVE ESP32 MiniKIT
### Device Description
W5500 ethernet mini board
### Hardware Configuration
no
### Version
v2.0.7
### IDE Name
Arduino Ide 1.8.19
### Operating System
Win…
pptsk updated
2 weeks ago
-
### Board
ESP32 Dev module.
### Device Description
![Sc…
-
Using the WizNet Ethernet Hat for the Pi Pico, I am trying the example software with CircuitPython. The ping test works fine as does the fixed IP, however setting up to use DHCP, It times out never ge…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
Is it possible to add support for the W6100?
I'd like to use IPv6 with WebServerSecure on W6100-EVB-Pico.
The Ethernet Library from Wiznet already supports the W6100 and IPv6, but no Secure Webserve…
-
Hi,
please check to support additional to the W5100 and W5500 as well the W6100.
I've bought this board: https://docs.wiznet.io/Product/iEthernet/W6100/w6100-evb-pico
Because the W5100s is pin-…
-
Hi again. I am trying connecting ESP32S3-wroom-2 and RFM22b-s2. I don't know if is it issue or I am doing something bad, but I have _code -16_ (RADIOLIB_ERR_SPI_WRITE_FAILED) and I don't know why. I w…
-
TCP_POLL_Read Select error 113, error = software caused connection abortion, fd = 54
I experience difference whether my ESP32 devices are running cable or wifi.
I have a number of ESP32 devices …
-
I will not send much information because i believe that is equal to a problem in http library and was solved (https://github.com/khoih-prog/AsyncHTTPRequest_Generic/issues/43 ). I have expecienced the…
-
Does Matter support both Ethernet and WiFi concurrently? I see that if Ethernet Telemetry is enabled, Wi-Fi is not supported:
```
#if CONFIG_ENABLE_ETHERNET_TELEMETRY
#define CHIP_DEVICE_CONFIG_E…