-
Pros:
- Every major problem you encountered in the way from 2.2 to 2.3 seem to be solved. As long as I've tested this release is perfectly usable.
- Former issues, such as the axis inversion I had to …
-
I'd love to get CnC with the high res patch working on linux but there seems to be a problem I can't fix no matter what I try. I've attempted to use both 32 bit and 64bit wine prefixes, Windows XP com…
-
Hi,
I am a total newbie at using the grbl software so maybe my question/observation is irrelevant.
I have observed that when using the $H homing command the Z and Y axis ignores the homing cycle.set…
-
I was playing around with cutting through-holes using helical motion like this:
G0 X0 Y100
G2 X0 Y100 Z-50 I0 J-100 P10 F100
M30
This should cut a spiral hole down through 50mm of material dropping …
-
Hello again :)
I'm having trouble with the PRU I think.
After successfully building the am335_pru_package and beagleg code, I attempted to run the following line:
```
./send-gcode -P circle.gcode
``…
-
I have been hacking on version 0.8c of GRBL to add in functionality for a "probe" function that will decrease the z-axis until a sense pin goes low or until a z threshold has been reached. So far, I …
-
First, thank you for this program! I'm excited that there's ongoing development with Grbl -- the CNC world needs a program like this.
I'm not sure why, but I wasn't able to flash the Grbl hex to m…