-
Flashed the latest image I found mentioned for gru/scarlet to a microSD with the Chrome Recovery Extension after extracting the .gz and appending .bin to the name (I can't recall if it is smart enough…
-
here is the code i submitted for my final project...lol and attached below is my final paper
# define Audio 0
# define pwm3 OCR2B \sets the top of timer cycle
# define pwm5 OCR0B
# define pwm6 OCR0A
#…
-
Avaliar (inspecionar e corrigir) CST23: https://github.com/Prof-Calebe/substituicao/wiki/CST23
-
Hi, I want to use Stallguard and a Library to run the stepper such as Accelstepper Library. I've combined Stallguard example and Accelstepper example. Stepper is running but output is:
> 0 0 55
0…
-
Hi,
First of all, great work on the library! It has been very helpful!
I am trying to operate a NEMA17 motor and need to know when it is stalled, hence i chose the SilentStepStick TMC2130. I modif…
-
I downloaded the "Windows ispc binary and examples (v1.4.3)" package, and have used it to compile several .o files. Then, I try to produce a .exe or .dll file from these, using cygwin, and I get the f…
-
I am trying to drive a nema23/56 stepper with a TMC2660 on the TMC2660-BOB breakout board, with an arduino mega 2560. I'm attempting to run hardware SPI on the mega SPI pins (50 (MISO), 51 (MOSI), 52 …
-
Hello,
I'm currently trying to drive a stepper motor which drives a linear stage to move something around. I have a fysetc v3.0 TMC2209 connected to a CNC shield v3 which sits on an arduino mega 25…
-
Hi!
First of all thank you for your amazing work!
Now my problem: I'm trying to get stallguard working with my arduino nano and fysetc tmc2130. I got the "simple" example working fairly quickly, bu…
-
I was trying to make the Grbl CNC software (https://github.com/gnea/grbl-Mega) work with some steppers in a couple sketches like https://wokwi.com/projects/328566930816369236 or the Uno like https://w…
drf5n updated
3 months ago