-
Coming from https://github.com/platformio/platformio-core/issues/1170 I've noticed that https://github.com/adafruit/DHT-sensor-library does not support `espressif8266` as platform, only arduino.
F…
andig updated
6 years ago
-
Hello!
I have my esp8266 milight hub working and connected to a wifi.
Now I want to connect it to a different wifi, while the old wifi is still present.
I thought the button "Clear Wifi Confi…
-
WS2812B flicker, WS2812 not.
I am facing a big issue when switching from WS2812 to WS2812B !
My configuration :
• IOT application, 6000 loc, including FASTLED 3.1 and AsyncWEBServer
• WS2812, …
hmiez updated
7 years ago
-
as this device is very cheap ~5$ and only need 2 pins and +/- hardware changes are not hard to implement, thank g mcclean for pointing this out.
connection can be done using UART0 non populated connec…
-
Hi,
My router is setup to accept clients using WPS button.
I'm trying to connect my ESP (please find listing below) to that router using WiFi.beginWPSConfig() method but program hangs about 3 minutes…
-
The move from 1.0.2 to 1.0.3 appears to cause bitmaps to no longer be displayed when using the Huzzah ESP8266.
I did a diff between the versions and there appears to be significant changes includi…
-
Scenario:
(1) LW latest version running on OSX or Linux (Ubuntu)
(2) Emblaser 2 using either ESP8266 websocket, or telnet (same situation for both connection types) - Note I have implemented telnet …
-
On ESP8266
Every time I push flash button in the IDE, i recieve this messages
...
[ 09:00:51 ] == Build success
[ 09:00:51 ] == Deploying firmware
[ 09:01:23 ] == Error deploying firmware: context dea…
-
I have the library set to reconnect on disconnection, but that doesn't work, and I find the clients frequently disconnected even though they are on WiFi. Is there a setting I can use, or another way I…
-
Is it possible to use multiple connection mode with EPS8266 Shield library? Maybe default ID of Blynk connection is 0