-
ESP32-C3 does not work with version 7.1.1 and 7.1.0.
Last working version 7.0.0.
Board: https://pl.aliexpress.com/i/1005005780121305.html
> ESP-ROM:esp32c3-api1-20210207
> Build:Feb 7 2021
>…
-
Hi, I'm trying to get "esp32_nim_ble_ota.ino" and the Android app "ESP32 OTA BLE" working,
unfortunately, immediately after connecting to the ESP32,
"Connected (and one second after) disconnected" …
-
hi folks!
direct (no downshift)
gpio 0 = w0
gpio 1 = w1
GND united
hikvision DS-K1101MK reader in mode 34 wiegand , uses mifare ultralight rfid, always receive 52 bit data (stable same but n…
-
Hello,
since a few days, I have a new CS-Z25ZKEW. This is a model with an empty plug and the wlan somewhere inside.
So, I thought, I can connect like this: [(https://github.com/DomiStyle/esphome-pan…
-
### Board
ESP32 Dev Module
### Device Description
ESP32 Dev Kit C
### Hardware Configuration
Nothing is connected, just the bare board
### Version
v3.0.0
### IDE Name
Platform IO
### Operati…
-
### Platform
ESP32
### Assembly
I did the assebly by myself
### nRF24L01+ Module
nRF24L01+ plus
### Antenna
external antenna
### Power Stabilization
Elko (~100uF)
### Connection picture
- […
-
Hi,
I am working with a local instance of Thingsboard v3.1.1 on a Raspberry Pi 4 running Raspbian 10 (Buster). During the testing for the ESP32-OTA example I have observed an error in the provided …
-
### Description
When playing music through LMS, Spotify, or AirPlay and then starting playback from another device via Bluetooth, the audio streams interfere with each other or something, resulting…
-
I encounter a problem with OTA as soon as I have the library in use.
Even when no ps4 controller is connected, but ps4.begin(..) is in the setup routine, OTA fails most of the time and I have to reb…
-
Hello,
I'm using ESP32-C3 mini-1 radio module and test and OTA (over the air update).
Therefore I'm setting up the device as access point and start the web server:
_AT+CWMODE=3,1
AT+CWSAP="my_ss…