-
Thank you for the very useful implementation ! That is exactly what I need for the FOMU with UP5K FPGA.
I inserted usb_cdc into a design with a softcore:
```
// ###### USB-CDC terminal …
-
When building Circuit Python in WSL for the FOMU, I am seeing a bunch of `undefined reference` errors. I'm following the basic instructions from [here](https://learn.adafruit.com/building-circuitpytho…
-
As mentioned in https://github.com/hathach/tinyusb/issues/984 the mass storage tinyusb seems to be failing to enumerate.
```
[34541.026812] usb 2-3.3.2: USB disconnect, device number 50
[34541.2987…
-
**What did you expect to happen?**
When I have `(cc +lsp)` in my private config and I open a `.c` file in a project, I expect it to be checked with the LSP syntax checker (ccls in this case).
**Wh…
-
In the osflow setup, the guide is out of date. The first step is to run `make`, but this generates an error because the makefiles do not set `TOP`, `BOARD_SRC` and `DESIGN_SRC`.
I am referring to t…
-
I encountered this today, and made a new clone of the repository on a different laptop, and ran into the same issue.
In the `conda env create -f $FPGA_FAM/environment.yml` step, I get this error (n…
-
The `riscv-blink.dfu` is not the default make target like it should be.
-
Hello again! I am studying how to enable the 32MB of SDRAM in the ULX3S, and I found in other projects interesting codes in VHDL that access to the ULX3S SDRAM (https://github.com/nullobject/sdram-fpg…
-
NEORV32 is an open source (BSD-3-Clause License) 32 bit RISC-V core and System on Chip with good documentation :smiling_face_with_three_hearts: https://stnolting.github.io/neorv32/. Multiple Open Sour…
-
When repairing an MSI, it's possible that SCCM has uncached the original install and downloaded the files to a new differently named folder. If the original MSI is no longer there, repair fails by def…