-
![image](https://github.com/user-attachments/assets/15a65673-1b08-481f-a5be-18724e98f0ac)
您好,请教250x122款,看您的照片,是要飞线才能刷吗?已经接好pin 1347,但SmartRF里并不识别。
-
Hello,
the pairing failed.
FW File: ESP-ECU-v10_8.bin
flashed the file: CC2530ZNP-with-SBL.hex to the CC2530
Wiring:
ESP32-D0WD-V3 CC2530
3V 3V
GND GND
D5 RST
RX2/GPIO16 P03
TX…
ds2k5 updated
2 weeks ago
-
To communicate with the MKS SERVO42C, would I hook it up to an ESP32 via UART, the board wiring (given in the MKS-SERVO42C repository), or use the adapter board that comes with it?
-
I'm using Archlinux. If I follow the guide http://gondolaweb.com/tutorials/installing-gondola/, the installation fails as the connection is refused:
```
> go get -v gnd.la/cmd/gondola
Fetching https…
-
RX (ATMega側) - GND 間に C 0.1uF を入れると書き込めない。 TX - GND 間は大丈夫。通信機側からの信号を受けとれなかったということだろう。
UART とか シリアル通信とかで調べていると TX, RX をプルアップしている例がある。R 2k 入れてみたが、書き込みできる。
https://www.ele-lab.com/mcu11.php
書き込めな…
-
I Am Trying to Display Emoji On ST7920 128X64 LCD Display with Arduino Uno.
But when i try to do it, it just shows a blank screen with black light ON, If I remove the emoji function and only keep t…
-
Hi,
For a future version, it would be better if you could swap the Vcc (3.3V) and GND on the pins row:
```
[... | 15 | 14 | Gnd | Gnd ]
[... | 04 | 02 | 3.3V| 3.3V]
```
to this instead
```
…
-
Would love to get this controller’s firmware updated to use it as a gradient strip. I would need to download it manually and then upload via WLED as there is no way to connect the controller to a PC. …
-
hi guys
i have just plug the PCB and press the start button, and the green gnd lights start blinking.
a falut message appears in the console: nscope went overcurrent?
do you know wthat happen…
-
Similar to some other people, I replaced my w10 vacuum mainboard which resulted in breaking the vacuum/dock pairing.
Vacuum would still return to the dock and charge, but the buttons on the dock don'…