-
If the WFM mode can be added to the kiwisdr software, it will be possible to listen to FM broadcasts (76-108mhz) and aviation bands (118-135.975mhz) from around the world by adding a downconverter ext…
-
When signal level is low, AM Demodulator starts producing nasty noises.
Looks like some problems with filtering.
Here is the recording for the test (10 kHz RF BW): [michael.zip](https://github.com/f…
-
Could the CB channel numbers be added to the default labels?
-
Hello,
Here is copy from terminal on SDRangel start / GNU Radio is able to start but can not detect LimeSDR USB, Lime suite also not able to start....
=>
pi@pisdr:~/Packages/sdrangel/build $ sudo …
9a4db updated
4 years ago
-
Hi,
i know, programming a sstv decoder would not be easy but it would be a nice feature ...
Thank you for your hard work
-
I have noticed some minor issues with the antenna switch extension:
1. With 8 antennas defined, the description for the 8th antenna is located partly outside the extension area. Perhaps the layout …
-
move to config file.
-
It would be nice if KiwiSDR would accept both comma and dot as frequency separator
http://sdr.vy.fi/?f=3699.2
and
http://sdr.vy.fi/?f=3699,2
should result identical behaviour.
This can …
OH1KK updated
5 years ago
-
In IQ mode, AM carriers are often very low frequency - less than a few Hz. This is because they are near zero-beat. They can even be DC!
The carriers (and thus the sidebands as well) are distorted …
-
The primary KPH Kiwi73 running v 245 has gone deaf after running for some time. Web access just hangs. I can ssh to it and see that kiwid is running, and there is nothing in /var/log/messages, df, o…