-
After using GGS for a few days, I am quite impressed with the quality of it. Very well done. Program limits are a useful feature. I could have used this a couple of times in the past. Even with the ar…
-
Just completed my build and installation on an Atlas/Craftsman 12" lathe. Fantastic project!! However, my build has a third mode called "Break Tool". This randomly happens every few minutes. It will a…
-
Hi James,
My ELS is functional! Thanks for your initiative in realizing this project!
However, having watched your vlogs several times I was unable to find an answer to three basic questions:
A…
-
Since this was brought up in a different thread, I thought it a good idea to open a separate issue. Hopefully it will attract a bit more input here.
The encoder support currently works pretty well …
-
I used this library to create a DRO (Digital Readout ) for a lathe. It worked great, but I ran into one problem and wanted to share this in hopes of saving people debug time. It might be good to menti…
-
Report from issue #44
> Interestingly, at 4000 and 8000 counts/rev the ramping stopped working: hard reversals; hard stops; hard velocity changes. But also, at 8000, after some commands, speed stops …
gin66 updated
3 years ago
-
### Summary
Hi, I'm a developer with MacPorts trying to update our povray port from 3.7.0.0 to 3.7.0.4 but I get a build failure due to ambiguous overloaded operator. [Here's the full log](https://…
-
## Here are the steps I follow to reproduce the issue:
1. Take sample config Sim Axis Lathe.
2. Try to change the config to reverse X axis in display (extents, toolpath, liveplot, tool shape preview) …
-
Currently we get:
```
G1 F600
F600
echo:Unknown command: "F600"
```
As far as i know, we should parse that.
All current Marlin versions.
-
I'm using an MSP432P401R LaunchPad to run GrblHAL without anything connected to its GPIO pins. (No CNC_Boosterpack nor any limit switches etc.). And I'm using Universal G-code Sender to communicate wi…