-
Serial Numbers can begin with zeros, in our investigation into this it's common for JLINK devices to have serial numbers of this form:
- 000820102635
- 000682561275
Listing devices with PyOCD s…
-
First things first, OS: `void Linux 5.11.15_1 #1 SMP 1618703302 x86_64 GNU/Linux`
PyOCD `0.30.2` installed through Mbed Studio (`/home/kyra/.config/Mbed\ Studio/mbed-studio-tools/python/bin/pyocd` a…
-
I have a problem when using pyOCD with an ATSAMD21G18A chip. The vendor file lists two PDSC entries for that part:
1. Keil.SAMD21_DFP 1.3.1 (deprecated 2020-10-21)
2. Microchip.SAMD21_DFP 3.6.144…
-
OS: Ubuntu 22.10
PyOCD version: 0.34.3
Hardware: Dialog DA14695 (ARM Cortex-M33)
Description:
I'm trying to use PyOCD to control a firmware. The firmware itself places a breakpoint instruction i…
-
We have had a report from someone internally using pyocd on a windows 10 system with a DAPLINK programmer trying to program an nRF52840 module whereby after it has finished, they get the error "An err…
-
Thank you for this great project. I have been using it as part of the [Zephyr project](https://www.zephyrproject.org/) and it works great.
I am using ARM semihosting for my `printf` statements and …
-
Hi my friends:
recently i upgrade pyocd from 0.34.1 to 0.35.1. When I flash my program as usual，pyocd show me `C target was not halted as expected after calling flash algorithm routine (IPSR=3) […
-
ST has updated the Keil.STM32L4xx_DFP package to 2.6.2 in June 2023.
They have introduced a second flash algorithm for the STM32L4R5 family in the *Keil.STM32L4xx_DFP.pdsc* file:
```
…
-
I am doing some trials with PyOCD + DAP link (probe is Max32625PICO) with the dual core nRF5340. I installed the pack nrf5340_xxaa.
Flashing the APP core is no issue and everything goes well. But whe…
-
### Variant
_No response_
### Control type
_No response_
### Control mode
_No response_
### Description
Hello everyone,
I recently got ahold of a half broken hoverboard with a split mainboard …