-
We have been using the RS485 port successfully on v1.0 devices for a while, but have recently taken delivery of a new batch of devices which are running v1.1 software and these are seeing intermittent…
-
I am using esp8266 as master and in my slave device, the readings are at two separate addresses. I tried to use readHoldingRegisters function two times sequentially. At the first time it responses …
-
Great project and thanks for sharing! Made me buy a Hanover one (84x8) as well. But little stuck since a few days. Hopefully someone can help?
- Tried to test-run the Hanover (with E connector shorte…
abl73 updated
5 months ago
-
This issue will automatically convert a Grbl_Esp32 machine definition file to FluidNC YAML format.
Change YOUR NAME in the title to some string that identifies your machine configuration.
IMPORT…
-
**Describe the bug**
On Windows 11 powershell installed with chocolaty, `rga mysearchterm` in a folder of pdfs yields one error per document of the form:
```
D:\datasheets\Communication Interface…
-
Hello everyone. I just recently had a new inverter installed and would love to take advantage of monitoring/data gathering, other than what SolarEdge provides. I've looking into the RS485 and purchase…
-
### Describe the requested feature
I have a network that involves a bacnet router that containes several virtual bacnet devices. These devices exist on network number 22011 instead of BAC0. I don't s…
-
Hi all
Last time I was trying to use the "mbpoll" program in my setup. The "mbpoll" is installed on UpBoard (mostly compatible with RPi board), on the board there is a custom RS485 hat. The TX/RX pin…
-
Hello,
In my case: Unipi G100 + M-Bus to RS485 converter + 9 x Qundis heat meters,
libmbus cannot find or read any device. Increasing time from default 300ms to min. 1100ms (baud: 2400) solves this …
tsr8 updated
2 months ago
-
Is there any possibility of using this between 2 or more nodes in a small network, with simple addressing? Or any suggestions of a protocol that is light and can support more than 2 nodes?