-
Simply plugging the tachometer pin into a free endstop port doesn't work well. The pullup voltage on the endstop pins is too low compared to the 24V power to the fan, so the fan spins constantly, sin…
-
i dont know if you will even see this im not an expert on github but i was wondering if you could make some size adjustments on this firmware for me as i have the ender extender on my ender 3 pro with…
-
Hello,
Sorry about my bad English, I speak Portuguese. I recently purchased an SKR Mini E3 v1.2 card.
Everything was working fine, but yesterday the cooling fan did not comply with the chosen sp…
-
### Description
My Ender 3 V2's screen slowly corrupts itself during a print. Other than this visual chaos, menu options seem to work like normal and all other functionality is okay.
I recen…
-
Just replaced a SKR Mini e3 V1.2 with a SKR Mini e3 v2.0, now BLTouch isn't working.
If I flip the Z-stop pins, black wire top and white bottom, the BLtouch lights up solid blue LED, no self test, …
-
I uploaded the new firmware onto the board and the firmware onto the TFT3.5 installed the com-port.
The board shows up as a USB drive as well, which is probably the issue and it's blocking the TFT3…
-
### Did you test the latest `bugfix-2.1.x` code?
Yes, and the problem still exists.
### Bug Description
I only see the wanted temprature I beleive?
![462763917_10162124114949255_467534545223503287…
-
so I just wired up the skr mini e3 2.0 and flashed the firmware-bltouch.bin from the github page. The Bl-touch is plugged into the five pin dedicated port on the SKR. Everything functions as it shou…
-
### Description of the bug
Negative volumes added to a part are not rendered properly in G-code thumbnails.
G-Code as exported, in PS' G-code Viewer
![image](https://github.com/user-attachments/a…
-
About tab explains:
Marlin has an option called MM_PER_ARC_SEGMENT that defaults to 1mm
this option has now been replaced with MIN_ARC_SEGMENT_MM and MAX_ARC_SEGMENT_MM. What is the associated feedb…