-
### What happened?
I have 2 Zigbee networks in operation. 1 USB dongle with CC2538 hardware works completely. The second is SONOFF Zigbee 3.0 USB Dongle Plus, CC2652P. I have the problem that I can't…
-
I can confirm what Cplant wrote [here](https://community.openhab.org/t/ikea-styrbar-only-2-of-4-buttons-show-up-as-channels/153793) that IKEA Styrbar has only 2 buttons available in OH instead of 4.
…
-
Thanks to https://github.com/Koenkk/zigbee2mqtt/issues/4874#issuecomment-812484150 I figured out, how to use the SNZB-03 properly.
The occupancy property is not reporting occupancy, but the **Zone…
-
Hi!
My Sonoff Mini R2 worked for a month in DIY mode, and now i cannot find why it doesn't work anymore in HA. I see it in the list, but cannot control. If i click to switch it on or off it grays o…
-
On/Off control works ok, Daily and Month energy meters are correct.
Volts, Amps, Watts I did not exactly check but looks that this is correct as well.
Only thing malfunctioning is overall energy u…
-
### The problem
I upgraded ESPHome from 2024.2 to 2024.6 for a Pico W with the Sonoff SI7021 sensor. Measurement always fails after the upgrade; after a rollback to 2024.2, it works fine again.
It…
-
I'm running into the following issue: I'm using NodeRED with the newest version of node-red-contrib-sonoff-server. The different in this version is that the node loads only the sonoff Dispatch/WS modu…
-
Here the dump for a new device: Sonoff B02. I can use it as a switch or light, but I cannot control the brightness or color.
[
{
"__v": 0,
"_id": "[hidden]",
"apikey": "xxxxxxxx-xxx…
-
This dumps contain one single _[Wireless Door Window Detector](https://www.banggood.com/DY-MC100B-Wireless-Door-Window-Detector-Sensor-Alarm-433MHz-for-Security-Alarm-System-p-1266532.html?rmmds=myord…
-
I would like to know how to get remote serial debugging working with ESP8266 devices. Seems like there should be a way to make this work, but I haven't found it yet. When I start debugging VSCODE is t…