-
Use branch: master https://github.com/PX4/Firmware/commit/803a71928f106ccefb453fc2bdf960fb22a63a89
1.Place a tailsitter vtol drone vertically on a level surface, qgc shows the angle of yaw is 90
…
-
**Describe the bug**
Through simulation in gazebo, I found that the vane will work in LAND and RTL mode only after I have performed the mission task. If I do not execute the mission mode, the vane in…
-
I have a VTOL tailsitter (with a + MC config). Out 0 & 1 are FW motors and Out 2 & 3 are MC motors and Out 4 & 5 are FW elevons. I am running an old PX4 firmware (2016) on Pixhawk 1 (from mRo).
In f…
-
Hello,
We use a PX4 quad X tailsitter configuration and we have the following issue:
For all the transitions tests we made (manual or missions you can see a picture below), the aircraft was neve…
-
Hi,
I'm building the tailsitter VTOL (2 motors, 2 servos).
Does BF support such configuration?
-
Hello Eric,
I have a Horus X10 with a Dragonlink v3 configured to mavlink transmission.
My setup is Pixhack v3 (Ardupilot 3.9.2) ---> Dragonlink microRX ---> Dragonlink TX (with MavLink Decoding) …
-
[TBS Caipiroshka (Pixracer) · PX4 User Guide](https://docs.px4.io/master/en/frames_vtol/vtol_tailsitter_caipiroshka_pixracer.html)
These links are reporting as broken
- ./_book/en/frames_vtol/vtol…
-
This week, I tried to use the hitl feature to verify my algorithm in Gazebo. I use the framework of hitl quadcopter, whose autostart parameter is 1001. And I use the iris quad model in Gazebo, whose p…
-
* what currently works
* jmavsim
* gazebo
* xplane
* flightgear
* what do we want to support
* can we make commander oblivious to HIL (commander rewrite)
* should we consider unifying with the…
-
Airframe: Quadrotor + TailsitterVTOL Quad Tailsitter (13004)
Hardware: PX4FMU_V2
Software Version: 0a58bd30
branch: master
[Flight log](https://logs.px4.io/plot_app?log=e6c1ad3b-140a-496c-98fa-12c5a0…