-
Wireless internet is available to conference attendees in session rooms, most common areas and the General Session including the EXPO floor. Simply connect to the ASTD wireless networking and yo…
-
For RTL8192CU, RTL8723DU, and CONFIG_RTL8812AU are not set (disabling wireless will break the build on the odroidxu4-4.9.y branch).
Dmole updated
7 years ago
-
Our challenge is unknown location, low budget and future scale.
Today we did an experiment on the wireless scenario we encountered during the game with
@amir-arad @yuvalg and I
Wifi test 1 --- 10…
-
### The problem
Some wireless switches are not detected in Home Assistant even though they are fully visible and manageable through the Legrand Home Control native app. From inside the attached diagn…
-
in case of receiving(no transmitting job), when dio1 interrupt triggered, there are chances getPacketLength() return 0. everytime this happened the lora will stop working, no more interrupt will be tr…
-
Would there be any possibility in adding a wireless control functionality? As in, hooking up a RPI or other small device to your plotter/cutter and then it could communicate with the master (your comp…
-
@RoaddogLabs
I'm going to order one of these (https://www.adafruit.com/product/3406) and wire it to the Chenbo LC amp. If you have any ideas hardware-wise to make this arrangement cheaper please po…
-
Keys to evaluate with proposed defaults
```ini
wireless.1.l2_isolation=disabled
wireless.1.mac_acl.policy=allow
wireless.1.mac_acl.status=disabled
wireless.1.mcast.enhance=0
wireless.1.rate.au…
-
I see 2 topics with the wireless:
- 1 long range wireless 1:1
- 2 short range wireless 1:X
and my idea is more the long range but with a bit of flexibility with tiered wireless that provide more …
-
### TFT Version
4.3.11
### Firmware Version
4.3.11
### Blueprint Version
4.3.11
### Panel Model
NSPanel US
### What is the bug?
Trying to upload an updated esphome config an…