-
I'm running a T-Beam 1.1 433MHz. running T-BEAM V1.0 + OLED code.
When plugged into USB the installed 18650 battery gets slightly warm, I'm pretty sure that this indicates the battery is charging. …
-
The starting frequency of the individual nodes can be varied, so why not instead have a "beacon" frequency and upon startup begin scanning adjacent frequencies for other beacons. By switching frequenc…
-
### The problem
I cannot get the remote_transmitter integration to work.
When attempting to send a code with a switch,
```
switch:
- platform: template
name: Raw Code Power Button
…
-
So I have been trying the last days to decode a tpms sensor, similar to the jansite but it does not use fsk till what I can see.
I have not been able to detect the Id from the bits, it seems it's m…
-
**Describe the problem you have/What new integration you would like**
Hi, it would be nice to have a implementation of RF 868MHz frequency for the CC1101 moduls in ESPHome working like "out of …
-
I configured mosquito on Hassio and set up enviro weather to send readings to it (one readfing every 15 mins and upload after 10 readings). But I noticed on the graph are reported only the value from…
-
Hello Josar,
first of all thank you very much for releasing this awesome tool!
Since a couple of days I have the issue that RFmqtt cant connect to mosquitto anymore.
If I try it on the comma…
-
Hello All,
Hoping to get some assistance with this issue. Been having problems for a while and cannot figure out how to fix it. This is a very similar problem to #222 (minus the use of docker) and …
-
Can you introduce a module that supports: 300-348 MHZ, 387-464MHZ /. 779-928MHZ cc1101 module with multiple frequencies?There are restricted modules on the market!
-
Sehr schönes Projekt,
gib es für den Arduino mini/Nano auch ein Schaltplan für die Pinoutbelegung
Mfg
Marco