-
```
Hi, This is actually kind of feature enhancement request.
What steps will reproduce the problem?
1. According to:
http://www.smallnetbuilder.com/wireless/wireless-news/32435-higher-power-now-all
…
-
```
What steps will reproduce the problem?
1. MBP, OS X 10.8.2. Viewing netflix or similar, no tx/rx after about 20min.
Connection stays up, but checked with wireshark, no packets move. No issues on …
-
NanoPi R2S Plus SBC has a WiFi module based on RTL8822CS.
In LuCI I choose Network → Wireless, then Add one 5 Ghz network (select channel manually), Save & Apply.
After confirming that my 5 GHz SS…
-
```
What steps will reproduce the problem?
1. MBP, OS X 10.8.2. Viewing netflix or similar, no tx/rx after about 20min.
Connection stays up, but checked with wireshark, no packets move. No issues on …
-
```
Hi, This is actually kind of feature enhancement request.
What steps will reproduce the problem?
1. According to:
http://www.smallnetbuilder.com/wireless/wireless-news/32435-higher-power-now-all
…
-
HT was enabled, but the redundant part in the [.csv] file has been deleted.
![Intel Xeon w7-2495X, 5 0GHz (OC), 24 Cores, 2023-Q1](https://user-images.githubusercontent.com/55441397/225665334-364ad3b…
-
IEEE 802.11 ESSID:"LEDE_5G"
Mode:Managed Frequency:5.26 GHz
Bit Rate=300 Mb/s Tx-Power=12 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
…
-
### Robot Model
Turtlebot4 Lite
### ROS distro
Humble
### Networking Configuration
Discovery Server
### OS
Ubuntu 22.04
### Built from source or installed?
Installed
### …
-
I am able to use the python script to get all the 2.4Ghz network connected devices list using the included script however I am not sure how I can also request the 5Ghz connected devices or if I need a…
-
### What would you like to see in luci?
Currently, if the user selects one of 5GHz DFS channels (52-144 in US, for example), DFS behavior is completely opaque to the user:
- If the hardware supports…