-
The display currently cycles through a predetermined list of real-time stock information every few seconds. A remote and IR receiver would enable the user to change program information on the fly. Exa…
-
**Is your feature request related to a problem? Please describe.**
A custom animation system for boards that has more complex LED.
**Describe the solution you'd like**
I already made a solution f…
-
В режиме "Manual" включаю 3 реле, и... еср уходит в постоянный ребут...
ещё такое же поведение заметил при создании сценария с пульсацией...
вот что в терминал пишет:
```
ets Jan 8 2013,rst ca…
-
I was migrating some code from ESP32e to ESP32S3 and getting errors with FastLED3.5 compilation. I fixed the F_CPU issue already reported. I also have other missing declarations:
C:/esp4/framewor…
-
Maybe an IPv6 issue?
1) Make a Matter group with a Device A as a light switch
2) Bind the switch to the group
3) Add Device B light to group -- both devices are on same wifi router.
4) Verify th…
-
# esp32p4 support status
- Low Power System
- ✅ Low Power Core (RISC-V)
- ❗ Low-power ADC (IDF-6875)
- ❗ Low-power GPIO (IDF-7536)
- ❗ Low-power I2C Master (IDF-7540)
- ❗ Low-power I…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
作者您好，我在vscode里通过ESP-IDF扩展安装了ESP-IDF 5.1，我直接在浏览器点击下载了该仓库的压缩包尝试编译，但是出现问题，找不到组件 i2c_manager，我试图克隆这个储存库的代码，放到项目的component/i2c_manager文件夹下也不行，请问如何解决这个依赖项？
或者，您可以提供一份编译好的固件吗？我可以使用 ESP FLASH TOOL 进行烧录？谢谢
…
-
### The problem
The response at first is perfect I can call the wake word and is very quick to respond. However if I don't use it for a while, and I have done some testing and it's about 15 minutes…
-
i am getting this error when i run milight.lua
dofile("initit.lua")
> 192.168.1.236 255.255.255.0 192.168.1.1
> PANIC: unprotected error in call to Lua API (milight.lua:6: malformed number near '0…