-
### Description of the bug
Change the E0 stepper current and hit save. Hit load - the old value is restored. Changing the current at the printer and then loading it shows the coirrect value.
X,Y,Z…
-
4.7.0
Win 10
The slicing engine seems to be struggling with circular perimeters. 99% of the code is fine, but there are random slowdowns during printing at 70 mm/s on a Duet Maestro, which should …
CCS86 updated
2 years ago
-
Is your feature request related to a problem? Please describe.**
After restarting candle i always have to reenter probe and command button gcode
**Describe the solution you'd like**
Some way to s…
-
Unified Bed Leveling is [implemented in Marlin](http://marlinfw.org/docs/features/unified_bed_leveling.html); it would be great to see an interface in Octoprint for running through the leveling proces…
-
## Description
With UI Customizer installed, when I access OctoPrint through an iOS device (my iPhone or iPad) and change a setting (any setting, not necessarily a UI Customizer setting), often the c…
-
I have a short question on how to configure BEDLEVELVISUALIZER in klipper config.
Under `bed visualizer settings` i configured the following command which reads the latest bed mesh and shows it in …
-
Currently, mesh and tilt leveling settings are mutually exclusive. It would be useful to be able to enable them both at the same time, at least in the context of dumping information to the terminal - …
-
I recently tried to use automatic bed levlling with a BLTouch. To so I performed the following steps:
- Added BLTouch and levelling mesh sections to the Klipper config
- Used the "Bed Visualizer" …
-
### The problem
When trying to upload files from my local PC to octoprint the progress bar moves right but then again to the left, so the upload seems to fail. Directories are not shown in the brow…
-
Why doesn't max_rate_mm_per_min: 2000 limit machine speed to 2000mm/min? When running Gcode, the speed is taken from the F.