-
Add support for the FlashForge Adventurer 4 and rebrands (MonoPrice Voxel Pro)
-
### Govee Device SKU
H713A
### Govee2MQTT Version
2024.01.24-ea3cd430
### Describe the issue
H713A is not presented as a Climate component in Home Assistant, which makes it a hassle to implement …
-
Hello!
I did not have enough airflow in the configuration with 5015 and I installed server 4028. It turned out that already at half power the air blows beyond the nozzle and forward, and not down on …
-
This is a list of stuff thats missing,feel free to close if this dosent belong in issues
- Atmos Equipement(pumps,air canisters,heaters,and freezers(dunno how they are called but to cool down the a…
-
I'm running Tinker firmware 18.11.1 on my Ultimaker 2 Go. Once in a while when a print finishes, the machine just unloads the filament. I run the same program multiple times and it doesn't always do i…
-
Origin of the request: https://community.homey.app/t/app-pro-piggy-bank/66677/356?u=frodeheg
-
If you abort/stop a print the extruder temperature stays at the print temperature.
-
This is a feature request.
Temperature sensors becoming loose might result in a situation where the temperature readout of one of the heaters becomes unrelated to the actual temperature of the heated…
-
using poseidon management nodes, snmpv1 set command via python
upgrade 'program.conf' to include additional mode specifically for heating a room,
add additional temp values for the rest of the house…
-
Using the 2.1.x branch. Cancelling a print causes Redeem to consume ~94% cpu and close connection to OctoPrint. OctoPrint is unable to reestablish the connection. Steppers are powered off but the h…