-
**Describe the bug**
No such file or directory: '/sys/bus/i2c/drivers/mma8452/2-001c/iio:device1/in_accel_x_raw'
**Describe which image you are running (example: bone-debian-10.2-iot-armhf-2020-02…
-
Boot image boot-a10s_olinuxino_micro.bin is damaged.
Steps to reproduce:
$ wget http://ftp.sd-card-images.johang.se/20210125_000001/boot-a10s_olinuxino_micro.bin.gz
$ gunzip boot-a10s_olinux…
-
```
What steps will reproduce the problem?
1.I used procedure mentioned in rowboat site for beagleboard C3. Downloaded
2.6.37 kernel gingerbread as per the details mentioned in site
2.copied root a…
-
I am having issues with the IMU not passing the setup. I isolated the issue to this portion. as shown below. I created the error IMU_HW_ERROR6 as this is where my code stops. I'm not sure what portion…
-
Hardware platform: Sparkfun SAMD21 Mini Breakout + BME280 sensor + VL53L0X sensor
Software platform: Arduino 1.8.3, Arduino SAMD Boards 1.6.20, Sparkfun SAMD21 boards 1.5.3, Windows 10 Pro 1803
Ai…
-
**Describe the question/query that you have**
I made my own program using esp_matter, and separated it to components for better maintained and testing.
I tested all my component expect the component…
-
![image](https://github.com/FYSETC/Nozzle-Input-Shaper/assets/68181325/ac9e5352-bcc9-4f70-9460-d8f032206bd1)
![image](https://github.com/FYSETC/Nozzle-Input-Shaper/assets/68181325/038fe84a-ef81-40e…
-
Recently I got USB supported MMDVM_HS_Hat from AliExpress, and it is programmed USB-CDC capable firmware.
I build recent MMDVM_HS firmware and installed, OpenBSD (I don't know about other OSes) canno…
-
Good work, but at final link stage, here is an error, can not find sysconf,
platorm win10, idf 3.3/4.3, ttgo example
-
## Describe the bug
The Drone does not pass the Preflight Check. QGC Reports an RC-Receiver Error in the Pre Flight Check Section.
If you try to arm Via QGC anyways, it gives you an "System Power u…