-
How do you calibrate a screen using your touch library ?
With the example calibration figures the errors get greater as your go from left to right.
Also, if I set rotation to same number in touch and …
-
I'm using a T4.1 with a 2.8in display. When I use the following code:
```C++
/********************************************************************
*
* ILI9341_T4 library example: displaying movi…
-
Arduino/libraries/Ucglib/src/clib/ucg.h:120:25: internal compiler error: in type_hash_canon, at tree.c:6953
typedef uint8_t PROGMEM ucg_pgm_uint8_t;
It needs to be re-defined as a macro me thinks…
-
Hi Juj;
Firstly I'd like to thank you for making this driver; I can confirm that the driver works with the [Elecrow 3.5" display](https://www.elecrow.com/wiki/index.php?title=3.5_Inch_480x320_TFT_D…
-
hello tttapa!
Do you plan to add support for bigger screens?
I am trying to adapt the MCU OLED SSD1306 example to an ILI9341 LCD.
My idea is to display in to display on the top the surround maste…
-
### Describe the bug
how to update device tree to support spi lcd and i2c touch ? which pins to link?
thanks !!!
### OpenWrt version
r14622-7da6ae78b3
### OpenWrt target/subtarget
rockchip/ar…
-
### The problem
I have an ILI9488 display. I used [this tutorial](https://www.youtube.com/watch?v=rq5yPJbX_uk&t=125s) to make the display work using arduino IDE and this library: TFT_eSPI. The disp…
-
Hello! In my current project, I use ESP32 and display with ILI9341. I would like to use your library, but - as a beginner - I have a lot of trouble with that. Is there somewhere documentation that des…
-
The screen is over heating where the flat cable is located. I did the entire process and it's working, but the thing is "burning".
I'm using this module: http://www.lcdwiki.com/2.4inch_SPI_Module_ILI…
-
**Describe the problem you have/What new integration you would like**
So I have a 4.0" TFT Touch Display based on the ST7796 Driver which supports touch and runs on the SPI bus.
Is there any w…