-
### The problem
In previous versions was possible to save custom board configuration into /config/esphome/.esphome/build/[your-esphome-device]/boards directory. This location does not exist anymore. …
-
The TPMS-Jansite-Solar is supported by OMG since FSK can be enabled. With OMG 1.60 and 1.70 I face the following behaviour running OMG on a LilyGo. The sensor data is sent with the mqtt topic `OMG/OM…
-
Hi, i flashed my lilygo but the reasings i get are quite strange. Do i have the wrong sensors defined or something else not ok?
[T-Energy on A…
V1c99 updated
11 months ago
-
@lewisxhe on my board it is resulting in 0.013V .... can you check? all supply pins of the modem's really connected?
-
**Hi Everyone,**
I have tried to connect to mqqt.datacke.co broker which provides TLS-enabled security. In this process, I have downloaded the CA signed server certificate to the SIM7600 module and…
-
I have this [LILYGO-T-SIMCAM](https://www.lilygo.cc/products/t-simcam) Board
On the website it is recommended to use the PCIE SIMCOM module made by them, in my case, [SIM7600G-H[H441-08]](https://ww…
-
tried using the "Audio.h" for playing a mp3 file through T-deck speaker, but cant find a way to even import libraries needed on platformio to make use of the speaker play.
any small guide as which …
-
Hello,
I bought a [Lilygo TTGO T8 ESP32-S2 V1.1 ST77789](http://www.lilygo.cn/prod_view.aspx?TypeId=50062&Id=1321), but the display remains [desperately dark](https://github.com/Bodmer/TFT_eSPI/iss…
-
Popular module, in the heltec v3 and the new lilygo both use it, it's better in general.