-
updated to last version today (for Platformio 4.0)
now my Heltec does not show the wifichannel he scans anymore just a star (no problem)..
but no devices show up.. counts nothing..
(did try on 3 …
-
Hi,
I'm using the US915 bands, and using a RFM95+ESP32, coupled with a pycom LoPy single channel gateway. I'm running the abp file. I'm currently forced to use the 905.3MHz band. This is because wh…
-
A newly built image of v1.20.0.rc1 (latest commits) crashes on a LoPy1. It works well on a WiPy2 (clone).
Crash dump:
```
Rebooting...
ets Jun 8 2016 00:22:57
rst:0xc (SW_CPU_RESET),boot:0x13 …
-
Fails with OPENTHREAD = off. Error message:
```
LINK build/FIPY/release/application.elf
build/FIPY/release/application.a(modlte.o):(.literal.TASK_LTE_UPGRADE+0xc): undefined reference to `xMeshTask…
-
@DefProc - following on from your comments in the organisers' meeting yesterday.
I made a start on a rough outline of what a MicroPython / ESP8266 training session might look like.
https://githu…
-
Hi Robert, I'm trying to use this library for the 2-Channel 4-20 mA Current Loop Receiver 16-Bit ADS1115 I2C Mini Module with a Lopy, but I do not know if it's works. can you give some guidance to use…
-
Please include the following information when submitting a bug report:
* The Pycom board you are using (e.g. WiPy 2.0, LoPy): **FIPY**
* The firmware version you are using. You can get it by execu…
-
This simple RegEx pattern will allow for spellchecking every single English word.
Nebula should loop through every word on every pageload and verify each word is spelled correctly. Also on the admi…
-
* board: LoPy 4
* firmware: `(sysname='LoPy', nodename='LoPy', release='1.18.1.r1', version='f5d0c68 on 2018-09-06', machine='LoPy with ESP32', lorawan='1.0.2')` -- custom build but very close to `1.…
-
When executing the `getr` command with a directory name that exists and contains files, the `getr` fails fatally.
```
>mpfshell
[32m** Micropython File Shell v0.7.6, sw@kaltpost.de ** [39m
-…