-
I just received my FYSETC ADXL Nozzle-Attached PIS module, flashed both my mainboard and the unit with the most up-to-date version of klipper from my host PC, and upon defining the module in my config…
-
I just wanted to build MISO and ran into an issue:
```
$ mvn clean install | tee ../logs/build_${VERSION}.log 2>&1
[INFO] Scanning for projects...
[WARNING]
[WARNING] Some problems were encou…
-
The current pin assignments were mostly chosen before the board layout was made, resulting in a breakout board that has a large number of long, winding traces. I'm pretty sure we could choose better p…
-
I have been trying without success to get sumy to work in Jupyter Notebook. But it is always throwing error for the Tokenizer.
Here is my Jupyter Notebook code:
```
!python -c "import nltk; n…
-
Hey,
Im working on a project with arduino Due, FT810 Display chip and two SD Cards one for FT810 image loading and another to save files as datalogger so there are 3 spi devices.
1- FT810 cs pin…
-
# Handle
leastwood
# Vulnerability details
## Impact
All auction contracts except `BatchAuction.sol` do not verify that `fundsCommitted` is greater than zero when executing `withdrawTokens()`. Th…
-
Can I use an ESP32 for this project? If so, what changes would I have to make?
Thank you - Rowan
-
```
What steps will reproduce the problem?
1. Using the current MISO client with the EBSCOhost SUSHI server (and probably
other servers as well)and a valid set of credentials in the SUSHIConfig.csv
…
-
Issue #1a:
This device's 3.3V(nom) MISO output doesn't meet Vih(min) when used with a 5V MCU. For example, when used with a 328p operating at 5V(nom), the 328p's Vih(min) is VCC*.6. This means Vih(…
-
there is a typo in showing how to wire it to the microbit, it should be:
NSS: 16
SCK: 13
MOSI: 15
MISO: 14