-
Hello, thanks for your addition :)
I have NIBE SMO 20 with the upgraded firmware to be compatible with myUplink instead of Nibe Uplink.
Unfortunately, your integration does not download any data fro…
-
Should be a restoreentity-sensor that survives reboots
On hitting limits it should make sure to heat water all the way to max temp.
-
Moin,
ich habe seit ein paar Tagen das Problem, dass ich keine Werte mehr erhalten. Im Log nachgeschaut konnte ich sehen, dass es Probleme mit mit oauth gab ("error from /oauth/token").
Daraufhi…
teuti updated
7 months ago
-
Hi.
I have just reinstall my Home Assistant machine and after that I get some strange things in Nibe add on.
Before I reinstall it I have lot of values that I could use.
For example: Int. el.add Po…
-
When using latest hass_nibe (1.5.7) the water-heater operation preset is not working for boost-modes other than boost_one_time.
Got an F730 if that helps but assume this is a generic api-missing-fea…
-
Here it is written about connecting the power supply directly from the CTS602, where, among other things, +12V and GND are output.
> https://github.com/nic6911/ESP32_Modbus_Module/raw/main/electronic…
-
Upgraded Home Assistant docker container to 2024.1.0 and the following issues were found in the log at startup.
2024-01-05 00:21:39.132 WARNING (MainThread) [homeassistant.const] TEMP_CELSIUS was…
-
Hi,
Somehow I managed to crash the integration so I tried to remove the integration and reinstall it. When I'll try to add the integration again I'll get this message "Config flow could not be loaded…
-
I need a little help to get this up running please.
I have installed from pypi on Rpi zero with rs485 hat, is this the right way to do it ? another question is that I don't know the path to where to …
-
### The problem
I use modbus integration to configure a Nibe Heatpump. Config worked a long time correctly. Since 2024.2.0 the config is no longer valid. I use the climate option to display and writ…