-
**Description**
As the question post [here](https://stackoverflow.com/questions/56339181/how-to-escape-colon-when-add-device-to-docker-container), if device name has `:` in it, `--device` cannot wo…
-
**Describe the bug**
Display loses signal after loading amdgpu via kldload under FreeBSD-CURRENT with RX 6800 XT with sienna_cichlid firmware installed.
The screen goes completely black and the on-s…
-
### Summary
Hello,
Would it be possible to allow customising the following values as shown in the screenshot below?
- [VendorName ](https://github.com/SiliconLabs/arduino/blob/65a739a859fa8b9…
lboue updated
5 months ago
-
请填写以下信息.
Please fill in the following information.
Install ENV: (You can find it in the boot interface.)
* DMI: Proxmox VE 8.2.4
* CPU: E3-1240L v5
* NIC: virtIO Lan
RR version: …
-
The react-native-serial-port-api works well from start of the react native app, but when restart the app from RNRestart Libiary or DevSettings.reload() method, the react-native-serial-port-api seems h…
-
This is with a Lenovo X220 (Sandy Bridge, i5-2520M) running 11.2 release. The webcam will initially work, but soon will fail.
```
% pwcview
Webcam set to: 320x240 (sif) at 5 fps
X Error of failed…
-
I would love support for my [Supermicro X7DBU](http://www.supermicro.com/products/motherboard/xeon1333/5000P/X7DBU.cfm) (Super IO: [Winbond W83627HF/F/HG/G](https://media.digikey.com/pdf/Data%20Sheets…
-
Hello,
I was trying to connect Kinect v2 to the robot and make it work, I am using ssh -X to access the robot's graphics, but every time I try to run roslaunch or rosrun, it shows X Error of failed…
-
I don't know what I did wrong, I followed the tutorial and flashed the Passthrough-firmware to the Sonoff 433Bridge R2 V2.2 (2021.01.19):
```
>python flashScript.py
Available COM ports:
1. COM1 …
-
Very similar to #2066 and probably also #3838
On Fedora 36, with clean install, some boots will hang (will not get to login screen, or even if it does, it hangs shortly after).
If `options snd-i…