-
Hi there,
and thanks a lot for your effort!
As I flashed the newest firmware onto my TTGO with 1262 ( and Stratux setup V. 29), I noticed, that the BMP280 isn't working as with the SoftRF or OGN T…
-
**Describe the bug**
TTGO Lora32 V2.1 Does not boot image after upload via Upload File System image in PlatformIO.
Build ok in PlatformIO
Upload ok in PlatformIO
Board stays with the meshtastic …
-
Hello. I am slowly making my car tracking assembly, and during so, i stumbled upon a silly problem - before car access point starts, TTGO already did his wifi scanning, and it didn't see the network, …
-
I apologize if I was wrong to write here, but I have not found where to request information on this very interesting ttgo-t-call sketch.
I declare that I am not a programmer.
I ask for help because …
-
Hi @moshe-braner , I just played around with some of my spare TTGOs and successfully installed the MB111 version. I also added the appropriate geoidsep to the config.json but it remains "0" both on th…
-
I am new to ESP32 and LilyGO... I bought_ the T-Watch S3. I see this firmware doesn't support the T-Watch S3... could the T-Watch S3 be added? I updated my T-Watch S3 with the latest firmware and it l…
-
### Board
TTGO Lora32-OLED
### Device Description
TTGO Lora32-OLED
### Hardware Configuration
Use serial
### Version
v3.0.3
### IDE Name
Arduino
### Operating System
Windows 10
### Flash f…
-
Hello there,
I am currently using a TTGO LoRa 2.16 in order to connect to the The Things Network. I replaced all the fields on the example sketch (ttn-otaa) from my TTN console. It has already been…
-
[https://github.com/dl9rdz/rdz_ttgo_sonde/wiki/Receiver-configuration](url)
I would like to have the value of the frequency-error (shown on the Display) viewable somewhere in the webinterface too. …
-
.