-
Hi, I get no video signal when flashing the 11/08/24 update, this particular board had never been updated and I do not know what version came with it but, I went back one commit to 04/08/24 release an…
-
logi_edu_demo.vhd needs to contain the following modified PMOD signals for the R1.1 board for things to work properly. I'm not sure how to create a VHDL file with some sort of constant that switches t…
-
Is the HDL source code available and more importantly a complete PCF file? Thanks.
-
Now that the vga_scaler automatically turns on over VGA when RTG is being used, would it be possible to allow you to output to 15khz (interlace the 31khz output or skip every other line)? My poor Comm…
-
Hello @chibicitiberiu ,
I'm your subscriber since 2021. I need your help on my Gnu GRUB(Gnu GRand Unified Bootloader) based operating system. I have some issues with undefined reference. Some error …
-
I just installed EndeavourOS with i3wm and then switched to Hyprland. With animations turned on, the desktop is laggy, though CPU and memory usage is low. When I disable animations on `Super+Alt+G` it…
-
I have used esp32 vga library but vcc pin is not required to be connected.
Also in other library of yours you did not connected the vcc pin but in this library you have connected the vcc pin at pin n…
-
### Regression?
Yes
### System Info and Version
System/Version info
```sh
Hyprland, built from branch at commit 9a09eac79b85c846e3a865a9078a3f8ff65a9259 (props: bump version to 0.42.0).
Dat…
-
greeting Mr. Yumorishita
I turned on the gpu option in the hope that the process would be faster. But it looks like an error because there is no module called cupy, is there a way to install cupy s…
-
### Ask your Question:
According to how PR #90 works, it selects the first item in the list from and output that's similar to `lspci | grep VGA`:
```nim
for line in lspci.split('\n'):
…