-
I have been trying to understand how the settings should be in order to get the actual frame when the camera is triggered by a Hardware trigger, however, I haven't manage to truly understand. I tried …
-
Would it be possible to adjust the `balance_ratio` for both Red and Blue?
Currently only one at a time is supported, but the calibration we get from Vimba Viewer has values for both.
-
Our camera moel is Allied Vision Camera Alvium 1800U-1242C.
The code can run normally in Ubuntu20.04. However, when I use it in Ubuntu16.04, and TL not loaded.
However, camera can also be connected …
-
I have a 2-camera setup where every camera has independent consumer thread with heavy image processing. Therefore I am using multiprocessing (separate process for each camera), and (it seems that) I m…
-
hi thare
there is example of my code:
import numpy as np
from matplotlib import pyplot as plt
from HW.vimba import Vimba
```
class Sensor:
def __init__(self, exptier_time: float = 0.…
-
We are using ProsilicaGT 1380 cameras and have started up Vimba Viewer which detects the cameras that are connected to the NIC. We try to connect by selecting Action > Open Camera By IP. The error b…
-
I have an intel NUC and 3x ALVIUM 1800 U-2050m cameras connected to it.
lsusb shows
```
Bus 004 Device 004: ID 1ab2:0001 Allied Vision Vision device
Bus 004 Device 003: ID 1ab2:0001 Allied Vision…
-
-
I have tried both setting it in the VimbaViewer as well as using the feature/AcquisitonFrameRateAbs parameter. No matter what the frame rate gets set to the AcquisitionFrameRateLimit. Is there any oth…
-
Acquiring images asynchronously, I'm running into an issue where frame data appears to be mixed up with subsequent/previous frames. In the example photos below, there are parts of these frames which a…