-
**The problem**
HA is running in the “unsupported environment” on top of Ubuntu 20.04 Server.
Recently had one wire disconnected from the USB modbus adapter.
For the modbus have a configured climat…
-
- [x] I confirm that this is an issue rather than a question.
## Bug report
It is not possible to run the color calibration via web-interface. Even if Kodi is running and the r…
Nears updated
3 years ago
-
Hello,
and thanks for the nice project.
I have built the board in Version 1.3.
Sadly, it is not working, and I have no voltage output on the output pins.
So far, I have checked PIN D6 which sh…
-
Hi Tasmota folks,
This is a feature request for adding option to set static IP using the web interface.
I would love to have such feature.
Cheers.
-
Hi
First i write WLED on my nodeMCU and after some days stop working but can not connect by IP.
Again flash nodeMCU by other new device. This also works some days and not GUI by IP open but function…
ghost updated
3 years ago
-
Hi!
I use a ESP01 module 1MB.
I have tried different builds:
WLED_0.9.0-b1_ESP8266_1M_full.bin
WLED_0.8.6_ESP01_1m_full.bin
WLED_0.8.6_ESP01_512k.bin
Transfered with esptool, result:
----…
-
Hi there; I am happily using WLED on sonoff basics; but would like to see addition of support for GPIO12 (the relay) built in.
This would be connected to the 5V AC/DC High Amp PSU for the LED driv…
-
Hello,
I have added my various controllers. Unfortunately they are not displayed.
But when deleting them they are visible.
![image](https://user-images.githubusercontent.com/50908826/95014324-5…
-
According to the ESP8266 docs you need delay(1) or more to enter DTIM-based wifi sleep (light sleep). Uploading the current version to a d1 mini without connecting anything else, the power consumption…
-
I'm having some issues sending transition from Home Assistant. Works fine for a transition down brightness but up birghtness I get some severe flickering. It doesn't seem to flicker when using the WLE…