-
Hi there, right away I'm sorry for probably being too vague but I dont know how to get more useful information...
Everything worked fine until yesterday when I ran `apt upgrade` on my Raspberry Pi …
-
Looks like I can only use Watson Services provisioned in the Dallas location. I tried using one in Sydney but the call failed. Is it possible to update the configuration to accept a gateway url as wel…
-
Reprise des message de #6
Benvi :
> +1 et pourquoi pas en gros faudrait se baser sur "l'interface" de Adafruit_NeoPixel (qui n'est pas >énorme : https://github.com/jgarff/rpi_ws281x/blob/master/pyth…
-
Hello, can you please add the LED Channel as one of the parameters when creating an instance of NeoPixel? This is so that we could use GPIO13 and GPIO19, which are on a different LED channel on a Rasp…
-
hello,
I use a neopixel stick and a raspberry pi 4, and I meet a problem with the SPI (gpio 10).
my script displays all the led in red, but a call on two of the script sends the leds in white (lumin…
-
I can't quite figure out how the conversion of rgb -> rgbw when using the sACN mode is done so I wanted to know if there was some way to take into account the color temperature of the white LEDs in or…
-
Hello,
Is there any way to use software PWM with this library, in order to increase the number of available pins ?
I am using a raspberry pi 3 and I need to control multiple LED strips independe…
-
Hi,
I've been driving a WS2812B strip (300LEDs) successfully with a Raspi 1B (512MB RAM) Raspbian Stretch without GUI for a few years with this software.
Recently I added new software to my Pi and n…
-
This issue collects interesting libraries that could be built from SwiftyGPIO and that could be useful for other people building embedded projects with Swift using specific sensors/devices, feel free …
-
great project! thanks.
can you fix it such that this works out of the box?