-
I have learned that the IP tunnel is the recommended communication mode between the host CPU and Openthread device (such as wpantund). It is fine for the CPU which can run complex OS like Linux and W…
-
K64F + MCR20A shield
GCC_ARM & IAR compilers
MESH_THREAD configuration
Channel 12
connecting to mbed border router with thread dynamic binary image
6lowpan works, but thread fails.
mbed-os-example-…
-
The mbed5 version of the LWM2M client OS layer [https://github.com/ARMmbed/mbed-client-classic/blob/master/source/m2mconnectionhandlerpimpl.cpp] refers to support of LwIP IPv4 only.
Line 125:
…
-
I'm searching for 6LowPAN border router to create CC2650STK SensorTag network.
Unfortunately CC2531 USB Dongle hasn't certificated in our country(Japan).
But CC2650STK has certificated in Japan. And C…
-
Currently There are 3 binaries present in mbedOS. One for each compiler. And each binary have a generic
configuration, i.e., mbed-os.cfg (which includes everything, hence increased binary size)
Howev…
-
I use this example and keep scan no beacon.
Here is my device
Gateway: FIREFLY 6LOWPAN GATEWAY 900MHZ
Mesh_6lowpan_ND: FRDM-K64F board + mbed 6LoWPAN shield (AT86RF212B)
**I think my Gateway has alr…
-
The documentation on this k64f-border router refers to the [mbed Client example][https://github.com/ARMmbed/mbed-client-example-6lowpan] which is running mbed OS 3.0.
The documentation and configurat…
-
There are no instructions on how to get the this client example configured as 6LoWPAN working with the (K64-BR)[https://github.com/ARMmbed/k64f-border-router]
The configuration of this example doesn'…
-
OOB I needed to remove this line:
```
"security-mode": "PSK",
```
from mbed_app.json for this example to work
-
tested with K64F and Atmel RF shield. mbed-os-example-client (6lowpan & thread) works on my same board and wireless network setup.
Result:
Connecting...
Connection failed!
mbed ls
mbed-os-example…