-
```
I updated the firmware, so that I could get the IMU to work with an xbee.
Well...it worked before the update. It would initialize, give me the menu, and
the data made sense.
Now it does this: …
-
```
What steps will reproduce the problem?
1. In flight, pitch and yaw (from magnetometer) work just fine.
2. Roll axis will indicate bank angle when changing bank from level fast
and then return to 0…
-
```
What steps will reproduce the problem?
1. In flight, pitch and yaw (from magnetometer) work just fine.
2. Roll axis will indicate bank angle when changing bank from level fast
and then return to 0…
-
Probably it is a niche requirement. But just proposing in case there indeed more applicable use cases than I thought.
Proposed tool syntax
`topic_tools mix [--trigger m1|m2|both] [--import …
-
```
I updated the firmware, so that I could get the IMU to work with an xbee.
Well...it worked before the update. It would initialize, give me the menu, and
the data made sense.
Now it does this: …
-
```
What steps will reproduce the problem?
1. In flight, pitch and yaw (from magnetometer) work just fine.
2. Roll axis will indicate bank angle when changing bank from level fast
and then return to 0…
-
```
What steps will reproduce the problem?
1. In flight, pitch and yaw (from magnetometer) work just fine.
2. Roll axis will indicate bank angle when changing bank from level fast
and then return to 0…
-
Hi!
Thanks a lot for your code, I hope you've had many a free beer because of it!
I am trying to use the "MPU9250_MS5637_AHRS.ino" code (minus the MS5637) and can't seem to get any type of meani…
-
Maybe it's possible to switch to a ESP32 C3 WROOM 02 for bluetooth compatibility too.
-
```
What steps will reproduce the problem?
1. Change PRINT_ANALOGS to 1
2. Upload
3. Open Serial Monitor
What is the expected output? What do you see instead?
As I rotate the board, I expect that AN…