-
**Describe the bug**
I would like to reduce the signal strength of the HDMI interface via `config_hdmi_boost` to reduce EMC emissions. According to the documentation the minimum value for `config_hdm…
-
I got this error in my logs:
```
Logger: homeassistant.const
Source: helpers/deprecation.py:197
First occurred: 17:26:39 (1 occurrences)
Last logged: 17:26:39
POWER_VOLT_AMPERE_REACTIVE was …
-
Please publish the source files for the bootloader, u-boot, and kernel to help with custom firmware development.
-
The vid=xyz URL param is very useful as it allows to construct less confusing URLs for end users.
Please add similar params for the other aspect of the DFU flashing configuraiton:
1. DFU Interf…
zapta updated
3 years ago
-
### What are you trying to do?
Install Tailscale directly to an Asus Router (compatible with the merlin custom firmware).
### How should we solve this?
1) Format USB drive using AMTM Format dis…
-
### Problem description
The device connects to Home Assistant correctly. Firmware and diagnostic information is shown. It is, however, not possible to control the color/brightness/pattern of the LED …
-
### What happened?
Apparently firmware 1.1.5 makes Better-Thermostat custom add-on from HACS unusable.
Everytime you try to set temperature or anything else from HA to the TRV, the TRV goes into O…
-
### Problem
I would like to supply a custom splash image in situations where the device does supply a firmware image. Running on Ubuntu 22, with servers, a desktop, a laptop and a handful of VMs.
…
-
_This is copypasted from a TXT that I wrote six months ago. Don't expect that I learn Markdown just to parse it here, heh._
These are the features that I expect from Secure Boot and the interface…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate.
- [X] Described the feature in detail and justified the reason for the request.
- [X] Provided spec…