-
Received an Electrodragon board and wanted to flash it. Get following error:
```Arduino: 1.8.3 (Mac OS X), Board: "Generic ESP8266 Module, 80 MHz, ck, 26 MHz, 40MHz, DIO, 1M (no SPIFFS), v2 Prebuilt …
-
Hi,
all my Wemos D1 mini have got a Powerlevel between Vcc 2,72-2,78.
Is this correct or a little bit to low?
Thanks
-
Hi,
I'm trying to use WifiManager with ESP8266 on electrodragon module (http://www.electrodragon.com/product/wifi-iot-relay-board-based-esp8266/).
I just uploaded AutoConnect example, connected …
-
Hi guys,
don't get bored about my maybe noob question, but I really started from 0 and learned a lot thanks to the guide and the wiki.
But there's one thing I can't understand...
I've got a Sonoff …
-
Did you see Bitluni Labs work on generating color video in pure software on the EPS32 ?
https://www.youtube.com/watch?v=-JXuwwXQh8c
Would it be possible to merge this and
1) get cheaper as t…
-
_(Please use this template for reporting issues. You can delete what ever is not relevant. Giving us this information will help us help you faster. Please also read the [FAQ](https://github.com/marksz…
-
On my other device, using Sonoff Basic template, iam having an issue where the device fails as soon as i assign anything to the GPIOs. I have tried assigning Relay2, Switch2, LED1 to any of the GPIOs.…
-
Originally reported by: **dstudinskiy (Bitbucket: [dstudinskiy](https://bitbucket.org/dstudinskiy), GitHub: Unknown)**
----------------------------------------
**Steps:**
* Flashed [Electrodragon r…
-
Originally reported by: **Xavier Smith (Bitbucket: [_xavier_](https://bitbucket.org/_xavier_), GitHub: Unknown)**
----------------------------------------
After logging in to the AP with a standard …
-
Not receiving with the lib on Raspberry Pi.
Since two RPis are one foot apart, only left antenna on receiver. I verified using correct GDO2 pin with an LED, G25.
sudo ./RX_Demo -v -a3 -c1 -f434 -…