-
![image](https://github.com/XiaojieFan/at24cxx/assets/163365267/ec9cb890-0a08-4886-af40-3a6a6eb5bc38)
如上图所示,使用该库时,发现上图需要增加器件地址才能读写OK。我使用的是CAT24C512。对于器件地址A2~A0都接GND的应该不会有问题,非0的就会导致通信不上了。
-
## Change an Identifier's E55_Type
Currently:
"https://sk.acdh.oeaw.ac.at/types/idno/geonames"
Change to:
"https://sk.acdh.oeaw.ac.at/types/idno/URL/geonames"
Currently:
"https://sk.acdh.o…
-
Hello all,
I am trying to document a H topology cable:
![kép](https://user-images.githubusercontent.com/1609182/190420632-b4a90e2d-d6dd-4a9c-977e-8fe89dc76c76.png)
From the following source:
h…
-
Are parameters required for a model? I was working on creating a minimal example of something when I came across a potential issue.
This doesn't compile properly:
```
module testmodule(gnd, o1,…
-
AIY Projects V2 Bonnet hardware pinout
AIY Projects pinout: https://aiyprojects.readthedocs.io/en/latest/voice.html#pinout-40-pin-header
```
3.3V --> 1 2
-
I have tried to run this code using ESP32 and Ultrasonic 2 click from Mikroe.
But the code doesn't work, even basic temperature reading also doesn't seem to work.
-
I have esp32 wroom.
I connected
3v3 - vcc
GND- GND
21 - SDA
22 - SCL
I have installed the library and uploaded the example it shows whoAmI() 117 as output.
![This is the ouptut I am receiv…
-
```
❯ cgra-mapper test_DefineSub16.json test_DefineSub16_mapped.json
Loading test_DefineSub16.json
Running Pass: rungenerators
In Run Generators
Done running generators
Running Pass: verifyinput…
-
Hi, im having issue on the result shown on serial monitor, my connection is as below:
VCC-----3.3V ( tried connected to 5V but getting same result)
GND-----GND
SCL-------A5
SDA------A4
AD0------G…
-
### Description
Although numerical linearization seems to be working as expected, the symbolic one yields an incorrect result. There is a collections of reports on this matter reported by the Ope…