-
```
What steps will reproduce the problem?
1.I used procedure mentioned in rowboat site for beagleboard C3. Downloaded
2.6.37 kernel gingerbread as per the details mentioned in site
2.copied root a…
-
I'm trying to build xboot on windows, using a completely stock setup (just did a fresh check-out) with AS6.1.
I have all the relevant binaries on my $PATH.
I've copied the example `x32a4.conf.mk` fr…
-
## Describe the bug
The Drone does not pass the Preflight Check. QGC Reports an RC-Receiver Error in the Pre Flight Check Section.
If you try to arm Via QGC anyways, it gives you an "System Power u…
-
**Describe the question/query that you have**
I made my own program using esp_matter, and separated it to components for better maintained and testing.
I tested all my component expect the component…
-
### Describe the bug
Having successfully enabled the Compute Module 4 IO Board embedded fan controller and RTC from config.txt using the following lines:
```
dtparam=i2c_arm=on
dtoverlay=i2c-rtc…
-
Apologies if there's a better place to ask about this, but I'm curious if we will be able to get a V2 uP version at some point that includes the full Bluetooth stack and an appropriate Python API.
-
Hi!
So I'm trying to use the esp32 instead of the esp8266. I followed the getstared from esd-idf and finally I got in the flash of the open62541-esp32, then this issue comes up(I think it is in the s…
-
One common feature of bootloaders is that they try to leave the MCU's state as they found it, turning off interrupts, resetting clock config, etc.
I've tracked some weirdness I'm seeing in user ap…
-
Here is the idf.py build log when trying to compile this example for target ESP32-C3 and using esp-idf master branch:
```
$ idf.py build
Executing action: all (aliases: build)
Running ninja in …
-
```
What steps will reproduce the problem?
1.I used procedure mentioned in rowboat site for beagleboard C3. Downloaded
2.6.37 kernel gingerbread as per the details mentioned in site
2.copied root a…