-
### Steps to reproduce
1) Connect an external control device to device playing video with aniyomi.
2) Attempt some input with external device.
You should see playback dump all buffered data and r…
-
Hello Wolle!
Knowing that you always answer thoroughly and in detail, I want to ask you a few questions that are of interest to me. I may have asked them before and some of them have not been answere…
-
Hi,
When i try t install a fresh burn img on my Cubieboard2 (A20) with the new X1 headless (VGA same pb), i have this (very long) log trace (take on ttyUSB) and the installation process don't finish …
-
### Feedback
I don't think this was written for newbies and I'm a newbie at this stuff...
It seems to understand all the devices programmed into the Harmony remote but getting it to do anything wi…
-
I was told this was the kernel being used for the Batocera 34 image running on the board. Here are two logs after trying to run two games:
log1:
[ 0.000000] Booting Linux on physical CPU 0x00…
-
siru (#siru), 2016-11-05 09:53:49 UTC
```
$ sudo inxi -d
Drives: [...]
Optical: No optical drives detected.
```
Installed drive:
```
*-scsi:0
p…
-
[homepage]https://exiftool.org/[/homepage]
[extra_link]https://github.com/exiftool/exiftool[/extra_link]
[tags]metadata,osint,documents[/tags]
[short_descr]ExifTool meta information reader/writer.[/sh…
-
After many hours in monitoring mode, the CPU in a Raspberry PI 3 goes to 100% of the load. The CPU load is produced by the tshark process. Do you have any ideas to solve?
-
### Basic information
* My operating system and version: Windows 10
* My MZmine version: 3.3.0
### What happened
* When I tried to import an aligned feature list, which I have previously exp…
-
Hi, the PIONEER Interface 2 does not register properly as a sound card. Looks to be a missing ALSA driver support.dmesg
idVendor=2b73 idProduct=001a
Mfr=1, Product=2, SerialNumber=0
Product:…