-
I want to debug Navx-MXP via ST-link v2. I took your project for STM32 and followed instructions in the *INVENSENSE_LICENSE_README.txt* file (but I installed Motion Driver v6.12 instead of v6.1). So w…
-
Hi,
First of all, thanks @hideakitai for your great work on this library.
I submitted a issue a week ago and you help me to discover I have only an MPU6500 instead of a traditional mpu9250 (here…
-
micropy-cli version 2.1.0 not work on Pyboard (STM32F405RGT6 MCU) and it's clones.
stubs generation end with errors. On ESP32 work without problems.
```
micropy stubs create COM8
...
MicroPy Pyb…
-
I'm pretty sure I'm doing something wrong here, but I cant connect my MPU9250 i ordered from Ali with this library.
I get an I2C Error Code : 2
I used the connection_check for checking the c…
-
Where can I download the firmware version of BTFL CC3D-RAID Betaflight 3.2. 5 Firmware mar-10-2018 14:10:41.?
-
When using MPU9250 over SPI bus .Begin() was failing to start the IMU. Errors occured at random places until i increased the delayNanoseconds to 200ns in the ReadRegisters function for the Teensy 4.0.…
-
Hello everyone,
In MPU6050_6Axis_MotionApps20.h it is stated that the FIFO output rate configured by the inv_set_fifo_rate byte has a hard-limit of 200Hz.
This is contrary to the MPU 6050 documentat…
-
1. Code snippet:
from machine import Pin, I2C
from mpu6500 import MPU6500
from mpu9250 import MPU9250
i2c=I2C(scl=Pin(22), sda=Pin(21))
sensor=MPU9250(i2c)
...
2. Expected result: MPU9250…
k79fi updated
3 years ago
-
### Debug adapter definition and debug configuration
I have tried to use a new adapter for my needs, the cortex-debug adapter (https://github.com/Marus/cortex-debug), which is a debug tool for ARM C…
-
### Hardware:
Board: TTGO T-DISPLAY
Core Installation version: espressif32@3.2.0 arduino framework
IDE name: platformio
### Description:
I have 2 interrupts from sensors, MPU6500_I…