-
## It is not a bug.
rethink firewall mode, no wireguard
initForwarders = 3, maxForwarders = 9 :
```
emulator64_x86_64:/data/local/tmp $ ./iperf3.17.1 -c 10.64.0.5
Connecting …
-
### What is the issue?
After closing the serve command the tailscale daemon starts consuming all the available cpu power.
I did run the ```tailscale debug --cpu-profile=cpu.prof2```
and this …
-
### What are you trying to do?
Up until recently we've been using tsnet in our application to allow subnet routing to local /32 IP addresses. We were able to get it to work with [this change](https:/…
-
I cannot connect in real-time mode to the hotspot or to the local WiFi network.
Hardware CORE2 v1.1, running the updated firmware as of today May 20 (`23f5a8f8c1c14cd66cff0aeb73578ed245a44c29`)
…
-
This is a generic issue for [RFD 163](https://github.com/joyent/rfd/blob/master/rfd/0163/README.md) discussion.
-
Hi,
I have a job that reads (sometimes) large web documents from HBase and performs entity extraction in those docs.
Between the HBase source and the NER Mapper I randomly shuffle the records to diff…
-
Allow binding another Nebula node's port as a local port on the machine. This would allow tun-less access to that host/port combo.
### Discussed in https://github.com/slackhq/nebula/discussions/101…
-
Steps to reproduce:
* Turn on Wireguard in the "Simple" tab and close the app.
* Use VPN normally for a day or two.
* Open the app and click big STOP button.
The app crashes while the VPN is sti…
-
I'd like to experiment with using the CC1310 LRM (625bps, DSSS, FEC etc) settings provided by TI with Contiki.
Unsurprisingly, a quick copy/paste of LRM settings from SmartRF Studio into `cpu/cc2…
-
"Does Hubris support DMA?" is a question I get occasionally, and DMA comes up in internal design discussions as well. I'm starting this issue as a place to record context and approaches.
# Current …