-
```
Ingame samples in ZipnZap rely on Cb2 being permanently high and Ca2 being
low with the register previously set up.
So the sample is simply produced by rapidly sending each entry to Port A
of th…
-
```
What steps will reproduce the problem?
1. make
# make
gcc -c main.c -o main.o -Wall -O3 -DVERSION_FULL='"0.6"'
-DVERSION_COPYRIGHTS='"Oricutron 0.6.0 (c)2010 Peter Gordon
(pete@petergordon.org.…
-
```
Ok, this is more a request for the future, more than an issue.
The real Oric screen aspect ratio is different from what we see in the
emulators (Euphoric has an option to try to solve this, usin…
-
```
Ok, this is more a request for the future, more than an issue.
The real Oric screen aspect ratio is different from what we see in the
emulators (Euphoric has an option to try to solve this, usin…
-
```
On the real Oric, when setting the key column and row, the curcuits take a
certain settlement period of around 12 cycles before the key state is
returned in Bit3 of VIA Port B.
Evidence resides…
-
```
If bit 6 in register 7 on AY chip is set to 0, keyboard cannot be read on real
hardware, but it works on emulator.
As it is stated in the oric wiki
(http://wiki.defence-force.org/doku.php?id=or…
-
```
What steps will reproduce the problem?
1. Any TAP that has more than one file such as TA1, TA2 only load if the
emulator is in Atmos mode.
What is the expected output? What do you see instead?
i…
-
```
What steps will reproduce the problem?
1. The easiest way to demonstrate the issue is with this short listing :-
10 GET A$
20 A=ASC(A$)
What is the expected output? What do you see instead?
T…
-
```
On the real Oric, when setting the key column and row, the curcuits take a
certain settlement period of around 12 cycles before the key state is
returned in Bit3 of VIA Port B.
Evidence resides…
-
```
If bit 6 in register 7 on AY chip is set to 0, keyboard cannot be read on real
hardware, but it works on emulator.
As it is stated in the oric wiki
(http://wiki.defence-force.org/doku.php?id=or…