-
Ahoy!
I've done some digging about HyperPixel4 touchscreen support for OSMC.
There are two changes needed :
1) Install RPi.GPIO (apt-get install python-rpi.gpio works)
2) Enable Goodix Touchpa…
Coren updated
3 years ago
-
The new update prevents the system from booting and marking **[kernel panic](https://photos.app.goo.gl/lpWQiTiKR07JEiKh2)**
I had to install the latest version of 2017
-
I tried running raspios buster with pi3 emulation mode but the container just consumed lots of CPU and output "qemu-system-aarch64: Slirp: Failed to send packet, ret: -1" once in a while. I waited for…
-
Using a Raspberry PI 3 and using the armv7-generic platform.
2 RTLSDR devices connected to a USB hub (powered)
I'm using the latest version 4.2.0 of rtl_airband.
Raspbian GNU/Linux 12 (bookworm)
…
-
Everything is displaying but the test never runs on my raspberry pi3. It just sits there with 0Mbps.
-
I mean ,it is not easy to compile pytorch in raspberry pi3 ,can you share your whl file ?
-
First, thanks for the great work on this crate.
I'm running into a bit of a strange issue where my video stream is refusing to start. My settings for the device:
```rust
let mut fmt = dev.format(…
-
我使用Pi3(安裝nodeJS v9.9)
使用v1.2.2 linux.tar.gz
執行後能正常新增,但是7688Duo丟溫濕度
只有成功傳送一筆資料就當了
[https://imgur.com/AqldPEJ](url)
-
Bought an IDE 2.5 adapter to make to work the HDD led with the Pistorm32 lite. With the Raspberry Pi3 I connect the adapter to the PP13 pin and works like a charm.
The problem is now, whit the Pi4,…
-
i have a PI3 with the relay of sos solution , but im stuck
at step 5
usbrelay-cmd ENUM
-bash: usbrelay-cmd: command not found
![image](https://user-images.githubusercontent.com/32562791/371…
NiekN updated
6 years ago