-
Hi there ,
Renogy rover 40a
Raspberry Pi 4
homemade cable
4 100w panels
I currently have solarthing working with couchdb and reporting up to pvoutput.
I would like to also use graphql , which …
cguay updated
2 years ago
-
Compiling /data/batteria-ext/.pioenvs/batteria-ext/src/esphome/components/api/api_connection.cpp.o
Compiling /data/batteria-ext/.pioenvs/batteria-ext/src/esphome/components/api/api_frame_helper.cpp.o…
-
Hi, i have followed the instructions very closely but i must be doing something wrong. This is the 2nd install ive done but both fail at this stage. here is the result when i enter the command
```
…
-
Version used: 2.7.3
When sending a GET Request to http:///api/state the json answer is missing the "l":{"po"} and the "p":{"po"} parameters:
`{"mqttsta":"Connected","pvosta":"Disabled","b":{"ch"…
-
Hi. Sorry in advance if this is not the best way to ask for help opening an issue here.
I arrive here coming from this [post.](https://renogy.boards.net/thread/535/using-rj11-cable-connect-raspberr…
-
It would be nice to be able to let RNGBridge V2 control the load output of the renogy charge controller depending on the SOC or even other information coming from the controller.
The idea is to hav…
-
I would like to be able to switch the additional outputs 1 to 3 using a Web gui switch and using a Rest API command just like the main load switch of the Renogy Controller.
This would make it much…
-
Hi! This is incredible work and I'm in the process of integrating it to a larger RAK WisBlock based project. I am curious about where you found the settings commands documented. Also if you had writte…
-
You have a working dbus-serialbattery installation and upgrade your VenusOS on Cerbo from 2.89 to 2.9, dbus-serialbattery stops working:
root@einstein:~# tail -f /data/log/serial-starter/current
@…
-
**VenusOS (please complete the following information):**
- Device type: RPi 3B+
- Firmware Version: 2.89
**Battery/BMS (please complete the following information):**
- BMS/Battery type: JK B1…