-
Notice when loading msfconsole that device will crash, screen goes blank and I need to long press power to restart device.
Upon fresh restart I was able to finally load msfconsole, however device cra…
0E800 updated
7 years ago
-
Hi!
I've noticed that when data rate on S.BUS port is higher than expected (noise or something else), buffer overflow at https://github.com/cleanflight/cleanflight/blob/master/src/main/rx/sbus.c#L155 …
-
Target Naze32
I am not able to get SBUS working with a Futaba R3008SB. I tried it in all possible combinations:
- with and without inverter cable
- using input 4 (the one under GND) and not working o…
-
As the Frsky X series rx (X8R, X6R, X4R) seems to output some strange signal (http://www.rcgroups.com/forums/showpost.php?p=29690292&postcount=12856), i had some thoughts about implementing some kind…
-
In the past I had duplicate Vario's in one of my models.
I suspect it happened because I used another one of my 4 vario's
To prevent this from happening again I enabled the option "ignore ID's" (is …
-
| Required Info | |
| --- | --- |
| Camera Model | R200 |
| Firmware Version | 1.0.72.06 |
| Operating System & Version | Ubuntu 14.04.4 LTS |
| Kernel Version (Linux Only) | 4.2.0-040200-generic |
|…
-
It looks like false failsafe detection here. Tested on latest master as it is. After this PR was removed it all seems fine. He is using AR5000 Spektrum PWM receiver.
![image](https://cloud.githubuser…
-
Back in version 1.0.0 my futaba 3008 using s.bus with a signal inverter was working well. It is no longer working at all. As best I can tell it happened in this commit: https://github.com/cleanflight/…
-
I've implemented Smart Port telemetry and tested it
https://github.com/frank26080115/cleanflight/tree/smartport
It's a branch in a fork of cleanflight but I don't know how to issue a pull request be…
-
Assan Gunter 8 Channel Futaba Reciver is not working with 3.2-RC2.
It is working fine with 3.1.5 on same hardware.