-
I am using SSD1331 OLED, it's a 96 x 64 OLED display. I want to print a 64 x 64 QR code on display, but I can't see anything on display. I looked up source code in SSD_13XX.cpp, and found this in lin…
-
This is the same problem as defined [in this issue for SSD1306](https://github.com/adafruit/Adafruit_SSD1306/issues/104).
When using multiple devices with mixed SPI modes - such as an SSD1306 and a…
-
* https://www.aliexpress.com/item/Free-Shipping-0-95-inch-7pin-Full-Color-65K-Color-ssd1331-OLED-Display-3-3v-5v/32646204260.html
* http://www.waveshare.com/w/upload/c/c7/SSD1331.pdf
-
Please provide the following information:
## library version ssd1306
## OLED display type ssd1306
## Steps to reproduce the issue -
## Expected behavior - load the sketch to ATtiny84
## Actual …
-
It is more like a proposal to improve the NanoEngine rather than issue. I thought it might be great to have an ability to pass driver callbacks (via functors, function pointers, tagging/specialization…
-
Hi all,
I am following the steps described in https://libvirt.org/kbase/launch_security_sev.html to enable SEV in the kernel of my AMD Ryzen 5 PRO 2400G (with Ubuntu 18.10). However, for some reas…
-
Hi,
I have bought this board https://github.com/LilyGO/TTGO-TS-V1.2,only VS1.4.
When I flash Karadio32 I get this :
rst:0x3 (SW_RESET),boot:0x13 (SPI_FAST_FLASH_BOOT)
configsip: 0, SPIWP:0xe…
-
_[this is a placeholder to record progress on implementation of the `ssd1351` device]_
This development was permitted by the kind donation of funds by @svenyonson to purchase https://www.aliexpress…
-
using a pyboard v1.1 with a 2gb micro sdcard for the files, and the adafruit ili9341, 2.8" captouch breakout
same thing happens when i use machine.Pin for the pins.
d/c --- 'x4'
cs --- 'x5' /ss…
-
I'm seeing the same issue on the NanoPi Duo as I saw on the CHIP with the SSD1331. This works fine on my ODROID C1+. The I2C and SPI SSD1306 works fine, so I'm not sure if it's a power issue. From wha…