-
I have installed KiCad 5.99, and it can be opened correctly. Personally, I think it is very respectable to be an open source project. Although the schematic diagram is still relatively simple, I don't…
-
Hi @LilyGO -
How do you power the T-Encoder through the T-Encoder-shield VBus?
I get 3V from the VBus here:
But low amps, which is not enough to run T-Encoder from the shield.
-
Hello,
I had some major struggles with getting a [YD-RP2040](https://circuitpython.org/board/vcc_gnd_yd_rp2040/) to work on the PCB and have a PR ready to go that add notes to the `README.md` explai…
-
出典: [raspberrypi.org](https://www.raspberrypi.org/documentation/usage/gpio/)
-
I have LoRa sx1302 concentrator from seeed studio. It has USB option or SPI option, I bought the T-PCIe module, and received already. I am wondering more information about the Pin out for the Mini-PCI…
-
I would like to connect USB devices (e.g. webcam) to the mini-USB port, basically reproducing what pabr and others got working in issue #230. I am not a kernel developer and have trouble understanding…
-
We using and testing LilyGo 4,7 Plus and have a problem with resetting ESP32 after enabling display with sequences epd_init and epd_poweron. We found a bug on PCB. Enabling display generating 0.9A pea…
-
Hey, got this cam recently, flash it according instructions on this repo's page for v.2: https://github.com/openipcamera/openipc-firmware
Model: WYZEC2
/etc/os-release:
ISA_VERSION=5.6.1.32
Now …
-
It would be convenient to support two UARTs on 461x boards as well.
> Small correction: Only in 4630 and 4801 (To support PMS7003 and RS485 transceiver respectively) we enabled extra HW serial USAR…
-
### Describe the bug
Hi
We use Pi3 as BLE Host, and the BLE Device we developed connect to Pi3 via USB port.
Recently, we encounter a kernel crash ocacionally, which looks has something to do wi…