-
Regarding .txt file:
Tested with 1.5"dia. maraging steel,
Column 1 = time (ms)
Column 2 = incident gauge voltage (V)
Column 3 = transmitted gauge voltage (V)
Column 4 = “strain control ring” gauge …
-
Prepare microHIL HW schematic
- Operating voltage: 5V
- Communication Protocol: USB
- Communication interface: Micro USB
- Relay channel: 8 ch
- Contact form: 1NO 1NC
- Dimension: 88(H)x 122(V) mm
- …
-
I want to rewrite the scripts with the following in mind:
- Rename scripts to `amd-*`, since this will bring the inclusion of other cards into the fold
- CLI Switches
- Array to hold custom `psta…
-
For a permanent installation the available options are already great (Power switch, Reset, HDD Led, Power LED) but is IMHO missing one crucial part. The internal PC speaker output for BIOS POST diagno…
-
### Feature you want to implement
There is no type hints for return value in functions controlling DDS or DAC, e.g., `set_dac_voltage()`.
Like other functions, we need to indicate their type infos.
-
Hello Jaromir,
there is a problem with the crossover in the current circuit. In FIMV mode and an external voltage source, the current goes to max.
I've already tried to find a solution. Unfortu…
-
* **Do you want to request a *feature* or report a *bug*?**
Feature
* **What is the current behavior?**
If we have several generators connected to same bus but controlling voltage of different …
-
We need to have a control that turns on a motor to a slow speed (low voltage) and waits until the current in the Talon increases (sees a load when the rope is attached to the robot). Then it increases…
-
Pack voltage: 80V - 170V
LTC6101/LTC6101HV - High Voltage, High-Side Current Sense
Avantage: Peut être alimentée par un diviseur de tension directe de la batterie. Peut-être configuré de façon bi-…
-
The default value of charge_v_factor = 2.0 didn't work at all for me (it actually went "full" power and caused cell 11 to hit OVP as usual).
When charge_v_factor = 3.0 instead it seems to work WOND…